Lector MS3580 Kit Quantum

• Marca:METROLOGIC
• Modelo:MS3580

Ficha Tecnica

Light Source Visible Laser Diode 650 nm
Laser Power 1.1 mW (peak)
Depth of Scan Field 19 mm - 273 mm (.75” - 10.75”) for 0.33 mm (13 mil) bar code
(programmable) at default setting
Width of Scan Field 30 mm (1.2”) @ 25 mm (1.0”); 150 mm (5.9”) @ 280 mm (11.0”)
Scan Speed 1650 scan lines /sec, omnidirectional; 80 scan lines /sec, single line
Scan Pattern 5 fields of 4 parallel lines omnidirectional; or button activated single line
Number of Scan Lines 20 (omnidirectional); or 1 (single-line)
Minimum Bar Width 0.127 mm (5.0 mil)
Decode Capability Autodiscriminates all standard 1D bar codes, including RSS-Expanded,
RSS-14 and RSS-14 Limited; for other symbologies call Metrologic
System Interfaces RS232, Light Pen Emulation, Keyboard Wedge, Stand Alone Keyboard,
IBM 468x/469x, USB (low speed and full speed), Laser Emulation, OCIA
Print Contrast 35% minimum reflectance difference
Number Characters Read Up to 80 data characters
Roll, Pitch, Yaw 360°, 60°, 60°
Beeper Operation 7 tones or no beep
Indicators Blue = laser on, ready to scan
White = good read
Length 66 mm (2.60”)
Width 67 mm (2.65”)
Height 108 mm (4.25”)
Weight 170 g (6.0 oz)
Termination 10 position modular RJ45 connector
Cable Standard 2.1 m (7’) straight; optional 2.7 m (9’) coiled
for other cables call Metrologic
Input Voltage 5 VDC + 0.25 V
Power 1.825 W
Operating Current 365 mA typical @ 5 VDC
DC Transformers Class 2; 5.2 VDC @ 650 mA
Laser Class Class 1; IEC60825-1:1993/A1:1997+A2:2001
Class 1; EN60825-1:1994/A11:1996+A2:2001
EMC FCC, ICES-003 & EN55022 Class A
Operating -20°C to 40°C (-4°F to 104°F)
Storage Temperature -40°C to 60°C (-40°F to 140°F)
Humidity 5% to 95% relative humidity, non-condensing
Light Levels Up to 4842 Lux (450 footcandles)
Contaminants Sealed to resist airborne particulate contaminants
Ventilation None required
Bar Code Minimum Element
0.132 mm (5.2 mil)
0.191 mm (7.5 mil)
0.264 mm (10.4 mil)
0.330 mm (13 mil)
0.495 mm (19.5 mil)
0 mm 100 mm 200 mm 300 mm
(0”) (4”) (8”) (12”)
Scan Area
Metrologic